Home / Photo prep / 100 ppi or 300 dpi? What resolution your print needs
100 ppi or 300 dpi? What resolution your print needs
Updated 15 Nov 2026 · Prepared by ArtzFolio
ArtzFolio Custom's print standard is 100 pixels per inch, so a 24 x 36 inch print needs a photo of at least 2,400 x 3,600 pixels. You will read 150 to 300 dpi elsewhere. That figure is usually advice for prints held or viewed close, and dpi (printer dots) is not the same measure as ppi (image pixels). A smaller photo can still be ordered, and the studio shows a friendly note.
Two different words: ppi and dpi
PPI, pixels per inch, describes an image: how many pixels fit along each inch of the print. DPI, dots per inch, describes a printer: how many dots of ink it places. Many sites use dpi to mean ppi. When this site says 100 dpi it means 100 pixels per inch; the ppi vs dpi glossary page sets the two side by side.
What each standard needs at common sizes
Pixels needed is the print size in inches multiplied by the ppi. These figures are plain arithmetic.
| Print size | At 100 ppi (ours) | At 150 ppi | At 300 ppi |
|---|---|---|---|
| 8 x 10 in | 800 x 1,000 | 1,200 x 1,500 | 2,400 x 3,000 |
| 12 x 18 in | 1,200 x 1,800 | 1,800 x 2,700 | 3,600 x 5,400 |
| 16 x 24 in | 1,600 x 2,400 | 2,400 x 3,600 | 4,800 x 7,200 |
| 24 x 36 in | 2,400 x 3,600 | 3,600 x 5,400 | 7,200 x 10,800 |
| 30 x 40 in | 3,000 x 4,000 | 4,500 x 6,000 | 9,000 x 12,000 |
A 300 ppi file for a 24 x 36 inch print would be 7,200 x 10,800 pixels, which is 77.8 megapixels. Few phone photos reach that. Our 100 ppi standard needs 8.64 megapixels for the same print.
Why 100 ppi is our standard for wall art
The eye resolves finer detail the closer you stand. Normal 20/20 vision resolves about 143 pixels per inch at 24 inches and about 95 at 36 inches, so a print at 100 ppi hides its pixels from about 34 inches away. Wall art is usually seen from further than that, and large prints from further still. The viewing distance guide shows the working for every distance from 12 to 120 inches.
When you should want more pixels
Our standard is a minimum for ordering, not a ceiling. A photo with more pixels is welcome and will look finer up close. If the print will be held in the hand or hung where people stand at arm's length, such as a small frame on a desk, more pixels help. The 150 to 300 dpi rule most sources give is meant for those close-viewing prints.
What happens if my photo is below 100 ppi
You can still order. The studio shows a friendly note first, because the picture may look softer. To see where your photo lands, use the photo quality checker, which runs in your browser and uploads nothing, or the pixels per inch table for five photo sizes against every listed size.
We make no promise about sharpness for a photo below the standard, so judge the preview, and remember that screens and prints differ a little in colour.
Questions people ask
What resolution does ArtzFolio use for prints?
100 pixels per inch. Multiply each side of the print in inches by 100: a 24 x 36 inch print needs 2,400 x 3,600 pixels.
Why do other sites say 300 dpi?
The 150 to 300 dpi rule is usually advice for prints held or viewed close. Dpi counts printer dots and ppi counts image pixels, and many sites use the two words as one.
Is 100 ppi enough for a large wall print?
At 36 inches the eye resolves about 95 pixels per inch, so 100 ppi hides its pixels from about 34 inches away. Wall art is usually viewed from further than that.
Can I order if my photo is below 100 ppi?
You can still order it. The studio shows a friendly note first, because the picture may look softer.
How many pixels does a 300 ppi print of 24 x 36 inches need?
It would need 7,200 x 10,800 pixels, which is 77.8 megapixels. At our 100 ppi standard the same print needs 2,400 x 3,600 pixels, or 8.64 megapixels.